High Strength Fiberglass Sandwich Mat for Cooling Tower
Basic Info
Model No.: LT600/P180/M600
Product Description
Model NO.: LT600/P180/M600 Technique: Needle Mat Fiberglass Type: E-Glass 4 Layers: 2 Layers Roving, Core Is PP, One Is CS Suitable Process: Rtm or Influsion Specification: LT600/P180/M600 HS Code: 70193100 Certification: ISO Mat Type: Stitch Bonding Mat Core Materials: PP or Nylon Process: Close Mould Trademark: utek Origin: China High Strength fiberglass sandwich mat for Cooling Tower is a 1380g/m2 stitch bonded composite reinforcement fabric containing a PP layer inside the fabric, the fabric consists of 4 layers: Direct roving in 0 degree and 90 degree directions, a PP non-woven layer in the middle, and chopped strands on the outside of the PP layer.
Applications/Markets: Marine, Transportation, Industrial Goods, Windmill. Cooling tower
The weight of PP or Nylon core is 180GSM and 250GSM.
Properties:
No binder,no warp and weft direction corssing,no ruffled.
No displacement deformation.Good resistance to erosion,fast wet out.
Fast resin transfer speed,good manufacturability,good workability.
Good physical and chemical properties,and easy design to solution.
Packing & Storage:
Each roll covering by polyethylene plastic bag,then placed into carton and set on pallet,or set on pallet directly.
The pallet shall no be higher than 2 layers.
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.
Picture of Product:
Technical Data:
Give us a chance, and we' ll return you with satisfaction. Contact us if you need more details on Sandwich Mat. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Fiberglass、Fiber Glass. If these products fail to match your need, please contact us and we would like to provide relevant information.
Applications/Markets: Marine, Transportation, Industrial Goods, Windmill. Cooling tower
The weight of PP or Nylon core is 180GSM and 250GSM.
Properties:
No binder,no warp and weft direction corssing,no ruffled.
No displacement deformation.Good resistance to erosion,fast wet out.
Fast resin transfer speed,good manufacturability,good workability.
Good physical and chemical properties,and easy design to solution.
Packing & Storage:
Each roll covering by polyethylene plastic bag,then placed into carton and set on pallet,or set on pallet directly.
The pallet shall no be higher than 2 layers.
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.
Picture of Product:
Technical Data:
Id | Layer | Unit | 1 | 2 | 3 | 4 | Stitching |
2.1 | Fibre orientation | Degrees | 0±3 | 90±3 | Non-woven | CS | |
2.2 | Nominal area weight | g/m² | 300 ±5% | 300 ±5% | 180 ±5%(177) | 600 ±5%(602) | 10 |
2.3 | Roving/yarn weight | tex | 1200 ±60 (1230) | 1200 ±60 (1233) | - | 33 subtex (33.7) | 150 dtex (148) |
2.5 | Av. filament diameter | mm | 17(17) | 17(17) | - | 13(13) | Polyester(textured) |
2.6 | Roving type | - | Direct roving (Yes) | Direct roving (yes) | - | Assem-bled roving (yes) | |
2.7 | Resin compatibility | | UP, VE | UP, VE | | UP, VE | |
2.8 | Stitching type | | | | | | Tricot, chain |
2.9 | Space between needles | | | | | | Gauge 7 |
2.10 | Stitching length | | | | | | 4.0mm |
CHANGZHOU UTEK COMPOSITE COMPANY CO.,LTD | ||||||
COMPANY INTRODUCTION: | ||||||
Company Name | CHANGZHOU UTEK COMPOSITE CO.,LTD | |||||
Address | Fuhanyuan 1-814,Taihu Road,Changzhou,Jiangsu,China | |||||
Contact Person | Name | Tel | ||||
Manger | Gong Xiaojun | 0086 13357899376 | ||||
Manger | Irene Xi | 0086 13961156380 | ||||
Business Condition | Manufacture | Trading | ||||
Consititution of company | Pvt.Ltd | |||||
Annual turnover | USD10,000,000 | |||||
Company Occupy Areas(M2) | 3000M2 | |||||
Shower room Occupy Areas(M2) | 200M2 | |||||
website | www.utekcomposite.com | |||||
http://utekcomposites.en.made-in-china.com/ | ||||||
Mainly Customer & Marketing | Europe,Asia,America,Middle East | |||||
Mainly Product | Fiberglass chopped strand mat (powder and emulsion), stitch mat, combo mat, uni-direction and biaxial fabric, RTM core mat, woven roving, special products like Ar-glass roving, chopped strand, thin fiberglass fabric, SMC(sheet molding compound), fiberglass/polyester geogrid and geocomposite. fiberglass mica fabric for insulation. | |||||
Sales Team | 15(University Graduates) | Product Team | 150 | |||
Research & Development Team | 12 | QC Team | 8 | |||
Certificate | ISO 9001 ,ISO 14001 ,SGS |
Give us a chance, and we' ll return you with satisfaction. Contact us if you need more details on Sandwich Mat. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Fiberglass、Fiber Glass. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : fiberglass sandwich mat
Premium Related Products
Other Products
Hot Products
PVAC Emulsion for Fiberglass Emulsion Chopped Strand MatCr (Li-MnO2 bottom) Battery Separator Er (Li-Socl2) Battery SeparatorFiberglass Paint Stop Pre Air Filter Media2850W Epoxy Resin Impregnated Fiberglass Binding Tape590gsm High Silica Sio2 Content 96% Fiberglass FabricHigh Temperature Hot selling Non-stick toaster bag made in chinaPTFE coated aramid fabricHigh temperature resistance dielectricity silicone coated fiberglass fabric clothHeat resistant Non-stick Oven liner resuable and dishwashableHot Sale TV products PTFE Non-stick BBQ grill mat products set of 2 or 3pizza belt, Ptfe teflon coated fiberglass fabric conveyor belt with kevlar borderteflon coated fiberglass fabric open mesh conveyor beltNon stick teflon fabric tapes with adhesive with linerptfe coated fiberglass fabric with adhesiveHigh insulation solar modular lamination ptfe sheetPremium A quality PTFE coated fiberglass fabric cloth