780GSM Fiberglass Closing Mold Mat for Infusion

Model NO.: MNM300/180/300 Fiber Characteristics: E-Glass Fiber Appearance: Staple-Fibers Total Weight: 780GSM The Second Layer: 180GSM PP Trademark: utek Origin: China Shape: Fiberglass Mat Diameter of Filaments: 13um Glass Composition: E-Glass The First Layer: 300GSM Choped Strand The Third Layer: 300GSM Chopped Strand Specification: MN300/180/300 HS Code: 7019 Fiberglass  closing mold mat is  a stitch bonded composite reinforcement fabric containing a  PP layer inside the fabric. the fabric consists of 3 or 4 layers: a PP layer non-woven layer in the middle, and chopped strands on the outside of the PP layer; or direct roving in 0 degree and 90 degree directions. Their unique structure enables high wetting capacity, which can increase your productivity and lower the costs of production.

Properties:

Improved mechanical properties and reduction of weight through an optimal positioning of the glass mat on the outside surfaces of the composite part.
Improved resin flow around the sandwich core, which is not slowed by the glass fiber.
Good compatibility between ROVICORE's core and the foam rubber or balsa wood allows for a better adhesion between these materials, thereby reducing the risk of delamination.

Picture of Product:


Technical Data:
 

Product Code	CS (g/m 2 )	Core (g/m 2 )	CS (g/m 2 )	Total Weight (g/m 2 )
M300/P180/M300	300	180	300	780
M450/P180/M450	450	180	450	1080
M600/P180/M600	600	180	600	1380
M300/P180	300	180	--	480
M450/P250	450	180	--	630
M600-/P250	600	180	--	780

Packing & Storage:

Each roll covering by polyethylene plastic bag,then placed into carton and set on pallet,or set on pallet directly.
The pallet shall no be higher than 2 layers.

Product shall be placed under dryness condition and shall no be open the covering membrane until applying.

 

CHANGZHOU UTEK COMPOSITE COMPANY CO.,LTD
COMPANY INTRODUCTION:
Company Name	CHANGZHOU UTEK COMPOSITE CO.,LTD
Address	Fuhanyuan 1-814,Taihu Road,Changzhou,Jiangsu,China
Contact Person	Name		Tel
Manger	Gong Xiaojun		0086 13357899376
Manger	Irene Xi		0086 13961156380
Business Condition	Manufacture			Trading
Consititution of company	Pvt.Ltd
Annual turnover	USD10,000,000
Company Occupy Areas(M2)	3000M2
Shower room Occupy Areas(M2)	200M2
website	www.utekcomposite.com
	http://utekcomposites.en.made-in-china.com/
Mainly Customer & Marketing	Europe,Asia,America,Middle East
Mainly Product	fiberglass chopped strand mat (powder and emulsion), stitch mat, combo mat, uni-direction and Biaxial Fabric, RTM core mat, woven roving, special products like Ar-glass roving, chopped strand, thin Fiberglass Fabric, SMC(sheet molding compound), fiberglass/Polyester Geogrid and geocomposite. fiberglass mica fabric for insulation.
Sales Team	15(University Graduates)		Product Team		150
Research & Development Team	12		QC Team		8
Certificate	ISO 9001 ,ISO 14001 ,SGS

Give us a chance, and we' ll return you with satisfaction.

Contact us if you need more details on Fiberglass. We are ready to answer your questions on packaging, logistics, certification or any other aspects about fiberglass sandwich mat、Close Molding Mat. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : fiberglass sandwich mat