Teflon fabric common seam joint fusing machine belt

Teflon fabric common seam joint fusing machine belt
Seamless fusing machine belt:
PTFE Fiberglass endless conveyor belt choose fine fiberglass and Kevlar as basic materials, knitted by special equipment and coated with fine PTFE so finally make one kind of special seamless fusing machine belt. Seamless fusing machine belt overcomes former problems of traditional joint fusing machine belt such as bad stability, ruptures, and deflecting for different girth on two sides at the joint. The using life of seamless PTFE Fusing Machine Belt are much longer than all kinds of joint PTFE Fusing Machine Belt.
 
2ply fusing machine belt:
PTFE fiberglass endless conveyor belt with static-resistance varnished cloth inside and tearing-resistance Fiberglass Cloth outside, 2ply belt has a great improvement on its intensity, long using life, well balanced thickness, excellent deflecting preventing capacity, smooth surface, it’s better for super thin fabric fusing.
 
Common seam joint fusing machine belt:
Seam joint fusing machine belt is made of fine material. The surface is smooth and luster and the price is competitive. It can substitute imported high price belts.
 
Our fusing machine belt features:
  1. High temperature resistance and adherence resistance;
  2. Good tensile strength, preventing deflecting;
  3. Excellent capability of resistance of static;
  4. mooth surface, more suits for super thin lining;
  5. Flex fatigue resistance, durable, long using life;
    PTFE Belting Vichen manufactures various of belts with its material of smooth ptfe fabric,ptfe mesh, kevla, silicon rubber etc to custom specifications, depending on each customer’s individual needs. To help determine the best belt for your unique application, you need provide the following information for our experienced technical manager to discuss your requirement. Ordering Your Ruida Belt
Whenever possible, have the following information available:      * Dimensions of belt: width and length
     * Desired splice, edge reinforcement and tracking devices, where needed
     * Pulley size and type
     * Any special construction or instructions concerning the fabrication of your Vichen belt. In some cases of 
       complex fabrication,a print may be requested.   Choosing the Right Material
There are a number of factors to keep in mind when choosing the belting material for your application:      * Temperature Range – Our ptfe fabrics have the capabilities of withstanding -70°C- +260°C constant operating temperatures.
     * Pliability – If the material is to track around pulleys that drive the belt, the diameter of the pulley is critical. The smaller the roller the more flexible the belt must be. Ruida’s thinner materials (0.010” and under) are more pliant than the heavier coated fabrics.
     * Release Qualities – The surface finishes of our materials range from a rough, semi-porous finish to a super smooth surface. The release or fabric impression results desired will be a determining factor.
     * Strength – Options to be considered are breaking, tensile and tear strength. How much of a load the belt carries, how fast it moves and how tightly it will be tensioned all must be considered.       Two-Ply Belts
Two-ply belts are constructed of two plies of TFE-GLASS™, laminated together with staggered splices. This provides a smooth, continuous thickness along the entire belt length which guarantees a uniform seal in packaging and heat-sealing applications. The belts are typically available in widths of ½" – 3".                

Contact us if you need more details on Small Machine Belts. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hashima Fusing Machine Belt、Printing Machine Belt. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : PTFE Fabric Conveyor Belt